LFE Lockfield Bumper

[Product Description]

Notice of Specification Change

The BUMPER currently sold to U Company and W Company will be sold without holes due to the difficulty of perfectly matching the precision and number of screw holes on the table.
Please drill pilot holes (2.5mm-3mm) yourself and fasten with the included screws. A tip: Place the tabletop and BUMPER upside down on a flat surface, lightly press them together so they fit snugly against the surface, align the widths, and then mark the screw holes with a marker or similar. This will ensure that the tops of the tabletop and BUMPER are flush with each other. Next, drill pilot holes approximately 10mm deep, aiming for the marker. We recommend using an electric screwdriver for drilling. When fastening the included screws into the drilled pilot holes, use a manual screwdriver, not an electric screwdriver, and tighten them firmly, feeling for tightness.

Please consider this before purchasing as it involves additional work.

[Precautions for Use]
This product is not heat-resistant.
It will soften at high temperatures.
Do not place near open flames.

Disassembly and assembly are required to replace the bumper.
There are no instructions or pages explaining the replacement procedure.
Please note that we are not responsible for any accidents or damage resulting from part replacement or use.

Size: 353 mm x 40 mm
Thickness: 25 mm
Made of recycled plastic

Due to the characteristics of recycled plastic, there is a possibility of blurring of the print due to individual differences in the surface.