C.D.C ACCESSORIES MULTI CLAMP CHEESEBAR PLATE ARM

C.D.C 048 CHEESE ROD CLAMP SET
A set of a rod with a 1/4 inch camera screw, a dedicated clamp, and a 1/4 inch screw (male-male). The clamp can be moved freely on the rod and fixed in place, making it very convenient for adjusting the height and angle. The uses are endless. Create your own gear with your own ideas.

C.D.C 041 RECTANGLE PLATE
A small plate with a 1/4″ female screw on the back. You can set up the stand anywhere you like using a tripod or clamp. A total of six round holes are used on the four corners and in the center of the long side. You can also attach poles or hooks by connecting 1/4″ male and female screws to sandwich the plate. You can also hang a sherpa cup or tongs directly on the four grooves on the long side.

C.D.C 050 MAGNET HOLDER
A smartphone holder compatible with MagSafe that uses a 1/4″ female screw on the back. Combine with a clamp to set the smartphone holder directly on a pole or table. Comes with a metal ring with double-sided tape on one side, so it can also be used with smartphones that are not compatible with MagSafe. It is lightweight at about 27g, so it is easy to carry around.

C.D.C 047 SCREW S
The screw has a 1/4 inch male thread on both sides. The diameter is matched to the cheese rod, so it can be used without any discomfort when converting the cheese rod to a male thread.

C.D.C 046 ROD CLAMP
A clamp designed specifically for cheese rods. By attaching it to the rod, it can be used sideways and the angle can be easily adjusted.

C.D.C 045 CHEESE ROD
A small rod with nine 1/4 inch female screws. Useful for increasing the height of an LED lantern. Can also be expanded by attaching an arm to the female screw on the side.

C.D.C 049 C HOOK
A small C-shaped hook. Uses a 1/4″ male screw. It can be connected to an LED lantern with a 1/4″ female screw, and can also be used as a receiver when using the round holes in a rectangle plate. The 5mm gap allows it to be hung without a carabiner.

C.D.C 051 ROLLING D-RING
The D-ring can rotate 360 degrees. If you attach it to an LED lantern with a 1/4″ female screw, you can adjust it to your preferred orientation when hanging it on a hook.

C.D.C 044 HOOK S
The new and old hooks are designed to be compact in size. The number of 1/4″ female screws on the top has been increased, making it possible to connect 1/4″ male screws. In addition to the top and bottom, 1/4″ female screws are also used on the sides.

C.D.C 043 HOOK II
The new hook is the same size as the old one, but the design has been changed to add more hanging space. The new hook also has an additional 1/4″ female screw on the top, making it possible to connect a 1/4″ male screw.

C.D.C 017 HOOK SILVER
A hook with a camera screw hole (1/4″). When used in combination with the CDC multi-pole clamp or CDC telescopic pole, you can hang lanterns and small items.

C.D.C 042 ROUND HANGER
A hanger that mimics a hexagonal shape. *Because it is made of aluminum, hanging heavy objects from it may cause it to bend or break